Boric acid in the garden: recipes for feeding, processing plants and flowers

The use of boric acid in the garden and vegetable garden is very popular. Inexpensive fertilization promotes rapid growth of crops and also protects them from pests.

What is boric acid used for in horticulture and horticulture?

It is difficult to provide ideal conditions for vegetable and horticultural crops on the site. Against the background of a lack of nutrients, plants begin to suffer from diseases and stop developing.

The use of a boric acid solution in the garden helps:

• strengthen the immunity of horticultural crops;
• contribute to the abundant formation of ovaries;
• ensure a good harvest even in dry seasons;
• improve the taste of berries and vegetables.

Ordinary boric acid powder is suitable for use in the garden.

Unlike many industrial fertilizers, the product is very inexpensive.

The benefits of boric acid for plants

It is especially useful to use boric acid in the garden on poor soil - brown forest, gray, sandy, sod-podzolic. When used correctly, top dressing gives the following results:

• stimulates the formation of new roots;
• improves the production of chlorophyll;
• increases the number of ovaries;
• increases the sugar level in fruits.

With a sufficient amount of boron, garden crops are much less likely to suffer from diseases. In particular, the use of top dressing prevents the development of bacteriosis and rot, and also repels dangerous garden pests.

Boron deficiency signs

It is urgent to add boron to the soil if:

• horticultural crops grow poorly and give a meager ovary;
• veins turn pale on young leaves and yellow spots appear;
• the bark dries and dies on the shoots.

Yellowing of the leaves indicates a lack of boron

With a boron deficiency, the fruits of vegetable and horticultural crops are often deformed.

Methods of using boric acid for a vegetable garden or garden

There are several main uses for boron powder.

1. Seed soaking. In order for the planting material to germinate faster, it can be held in a boron solution even before it is transferred to the ground. In a liter of water, only 2 g of acid are diluted.
   
   

   Tomato and beetroot seeds are kept in boric acid for about a day, cucumbers and zucchini are enough for 12 hours

2. Soil cultivation. Shortly before planting garden crops, you can spill the beds with boron solution. Cooking proportions remain the same - 2 g of substance per liter.
   
   

   After using boron to spill the beds, they must be thoroughly loosened

3. Spraying.For developing plants, foliar feeding is most often used, the dosage per liter of water is 1 g of acid. It is recommended to process the garden and garden three times - before flowering, during it and during the fruiting period.
   
   

   Foliar spraying is the most effective boron fertilization method

4. Watering at the root. Depending on how pronounced the boron deficiency is, 1-2 g of funds are taken per liter of liquid.
   
   

   Root irrigation is rarely used, only with an obvious lack of boron

Fertilizing plants with boric acid in the garden or in the garden

Any garden crops respond positively to moderate use of boron. But some plants need more minerals, while others less.

What plants can be sprayed with boric acid

Vegetable and fruit crops can be divided into 3 groups depending on how much they need boron:

1. Increased demand - beets, cabbage and pome trees. For these plants, feeding is carried out up to 3 times during the season - along the swelling buds, along the ovary and during fruiting.
2. The average need is berry bushes, greens, most vegetables and stone fruit trees. Feeding is carried out twice, at the beginning of flowering and at the very height of it.
3. Low requirement - potatoes, strawberries, legumes and herbs. Usually, the use of boric acid-based solutions is indicated only for deficiency symptoms.

For crops with a low demand for boron, fertilization can be applied to the soil 1 time before sowing.

How to dilute boric acid for plant spraying

Boric acid has a peculiarity - it cannot be dissolved in cold water. To mix the solution, the liquid is heated to a temperature of about 80 ° C.

Usually, the so-called "mother liquor" is made from boric acid, and only then added with clean water

For simplicity, the following algorithm is used. Only a liter of water is heated to the desired temperature. Boric acid is thoroughly stirred and allowed to cool, and then simply topped up with water to a standard 10 liters.

For convenience, when choosing a dosage, you can use the table for the use of boric acid for plants:

It is not customary to use an alcoholic solution of boric acid in the garden. But in extreme cases, you can dilute the product with water 1 in 20, in which case it will become safe.

Fertilizing plants with boric acid

The recommendations for using boron for vegetable and fruit crops are very similar. But plant requirements may vary slightly.

How to use boric acid to feed seedlings

Fertilization with boric acid for plants can be carried out already at the seedling stage during the period of active growth. Especially tomatoes, sensitive to a lack of a substance, need such feeding.

A solution for use on seedlings is prepared as follows - 1 g of boric powder is stirred in a liter of hot water. The cooled liquid is sprayed with the leaves of the seedlings.

Tomatoes and cucumbers

Tomatoes and cucumbers especially need boron. For the first time, you need to feed the crops before flowering, then during the formation of ovaries, and again during the ripening of the fruits.

Tomatoes are in great need of boron fertilization

For tomatoes, about 10 g of acid is dissolved in a bucket, for cucumbers - only 5 g.

Potatoes

With a lack of mineral matter, the crop tops turn yellow, the petioles become brittle and redden, root crops grow more slowly and are more likely to get sick with fungi.

Potatoes begin to experience boron deficiency in acidified soils

When alarming symptoms appear, the use of boric acid is recommended, 6 g of powder is dissolved in a bucket. For prevention, tubers can be processed even at the seedling stage - potatoes are sprayed with a strong solution, as many as 15 g of the substance are poured into a bucket of water. For 1 kg of planting material, about 50 ml of solution should go.

Grapes

From a lack of boron in the soil, grapes develop worse. Yellowish spots appear on the leaves, and the berries become smaller and resemble peas.

With a deficiency of a mineral substance, boron treatment for grapes is carried out during the budding period. Dilute about 5 g of powder in a bucket of water.

Timely boron feeding prevents grape peas

Beet

With insufficient use of boron, beets suffer from phomosis. First, brown spots with black specks in the center appear on the leaves of the culture, and then the root crop rots from the inside.

For beets, the use of boron is justified both before planting and during the growth stage.

Beet seeds are soaked in boric acid even before planting for 10 hours, only 1 g of the substance is diluted in a liter of liquid. After transfer to the ground, foliar dressing with boric acid is carried out at the stage of the fifth leaf, the concentration is used as usual, about 5 g for a bucket of water.

Cabbage

Cabbage reacts to the lack of boron with the appearance of glassy inflorescences and hollow heads of cabbage. The fruits become deformed and take on a bitter taste. The processing is carried out in 3 stages - the plantings are sprayed during budding, during flowering at the stage of the fifth leaf and during the ripening of the heads.

Cabbage is sprayed with boric acid three times from budding to fruiting

To apply the solution, add 2.5 g of the substance to a bucket of water.

Pepper, eggplant

If there is not enough boron in the soil, peppers and eggplants produce small deformed leaves, stop growing and can shed flowers and ovaries. Fertilize crops three times during the growing season:

• when forming buds;
• after 10 days, during flowering;
• at the stage of maturation.

Peppers, like eggplants, are sprayed with boron three times per season.

In a liter of water, no more than 1 g of powder is stirred, the solution is suitable for both root use and for spraying. It is best to handle planting by leaves.

Pears and Apple Trees

You can understand that fruit trees lack boron by the following signs:

• leaves are deformed and thickened;
• veins darken and become "corky";
• peculiar rosettes of small leaves appear at the ends of the shoots;
• the tops of the trees begin to die off.

The use of boric acid in horticulture increases not only the quantity, but also the quality of the fruits, in particular, prolongs their keeping quality.

At normal boron levels, pears and apple trees grow large and without blemishes.

In a pear, against a background of a lack of boron, pits and cortical spots on the fruits may appear, in an apple tree there are brown areas inside the pulp, resembling a cork in structure. To eliminate the deficiency of the mineral substance, 2 dressings are carried out for fruit trees:

• at the beginning of flowering;
• 10 days after the first spray.

Boric acid is diluted in increased volumes, up to 20 g per bucket, and the crowns are evenly treated in the evening. The yield then increases to 30%.

Strawberry

The use of boric solutions increases strawberry yields and improves the quality of berries. The treatment is carried out twice - strawberry beds are shed in early spring, dissolving only 1 g of the substance in a bucket of water, and the plant is sprayed before flowering. In the latter case, 2 g of the substance must be stirred in 10 liters.

Strawberries require boron treatments twice a season

Treatment of plants with boric acid for fruit set

Particular attention should be paid to feeding at the stage of the ovary. The optimal result is obtained by the use of spraying, irrigation at the root is less effective. For processing, use a pure boric solution without adding other components, the proportions take 1 g of substance per liter.

During the procedure, you need to completely process the plant from all sides in order to cover the leaves, flowers and the forming ovary. The temperature of the solution should be about 20 ° C, plantings can be sprayed only in the morning or in the evening, in the absence of bright sun.

Is it possible to water flowers with boric acid

The use of boron solution is useful not only for garden crops and fruit trees. The tool can fertilize flowers in a flower bed, this will have a good effect on the size of the buds and extend the decorative period.

What flowers like boric acid

Boron is an indispensable element for any plant. However, roses, dahlias, gladioli and garden violets react best to it.

How to dilute boric acid for flowers

You can fertilize garden beds by spraying or applying a solution under the root. In the first case, the concentration is 0.5 g per bucket, in the second - up to 2 g for the same amount of liquid.

Any garden flowers respond well to the use of boron.

As always, boric powder for use is dissolved in pre-warmed water. The procedure is carried out directly after the liquid has cooled down.

How to feed flowers with boric acid

On average, boron fertilization for flowers is carried out twice, during the period when the buds are gaining color, and during active flowering. A foliar application is used, spraying is carried out in the evening so that there are no sun burns on the leaves. If top dressing is carried out at the root, then the soil is pre-moistened, it is impossible to water dry soil with boric acid, it is dangerous for plants.

How to spray roses with boric acid

For lush flowering roses, it is enough to feed with boron 2 times - during the formation of buds and a week later, when the bushes bloom. The recipe for feeding with boric acid is standard - the substance is diluted in hot water (10 g per bucket), processing is carried out in the morning or evening.

Boric acid provides abundant and vibrant flowering of rose bushes

You can protect roses from fungal diseases and strengthen their endurance even before planting. Shrub cuttings are soaked for several minutes in a concentrated boric solution, 20 g per 10 l, and then transferred to the ground.

Use of boric acid in pest control

The beneficial boric acid promotes plant health, but is poisonous to most insects. Therefore, its use is recommended, including for the treatment of pests.

From ants

To get rid of ants, bait is used. For example, you can add 5 g of boron powder to a glass of sugar syrup and pour it over the beds and near insect nests. It is necessary to carry out processing in the middle of spring; strawberries, carrots and garden flowers need special protection.

Sweet baits with boric acid are used to kill ants.

From wood lice

Small wood lice actively reproduce on moist acidic soils and poorly cleaned areas. The use of boric acid in gardening and horticulture helps to get rid of them, you need to dilute 10 g of powder in 500 ml of water and spray the passages between the beds. The procedure is carried out at the beginning and middle of summer, when wood lice are especially active.

The use of boric acid from woodlice is especially justified in humid warm weather.

You can process woodlice from planting potatoes, beets and tomatoes, as well as fruit shrubs. Spraying should be carried out on wet soil so that the roots of the plants do not get burned.

From the bear

It is quite difficult to get a bear out of the garden, but boric acid gives a good effect. It is necessary to make a special bait - 1 kg of steamed grain is mixed with 2 small spoons of the substance and spilled with any oil in a small amount. For use, the boric mixture is embedded directly into the ground or placed in the passages left by the bear.

To remove the bear, use a bait of boric acid and grain

The use of baits is allowed for the protection of any plants, especially potatoes and beets. You can decompose the homemade poison for the pest in the beds immediately after planting the crops, since the bear wakes up already at 12 ° C.

From aphids

It can be difficult to remove aphids using boric acid. The fact is that the pest feeds only on plant juices and does not pay attention to baits. But spraying gives a positive effect - 2 g of powder is poured into a liter of liquid, mixed and the plantings are abundantly processed on leaves, buds and ovaries.

When treating aphids, it is important to spray the leaves both above and below

The procedure is carried out from the end of May, when the aphid begins to attack the planting in warm weather, and is repeated as necessary until the fall, but not more often than once a month. When using boric solution, you can protect against pests by cabbage and tomatoes, beets and eggplants, as well as flowers, grapes, gooseberries, currants and other crops.

How to treat plants with boric acid from phytophthora

The phytophthora fungus can affect any crops in the garden and in the garden, but potatoes and tomatoes are especially often affected by it. Under the influence of the disease, dark spots appear on the leaves and fruits, and underground tubers are exposed to dry rot.

From late blight, tomatoes are treated during the period of active growth and fruiting

To eliminate the fungus, it is necessary to dilute 1 small spoonful of boron powder in a bucket of water and spray the plantings, as well as carry out root medical dressing. The use of the substance is indicated for noticeable symptoms of the disease; it is necessary to carry out the treatment in the evening and morning. If tomatoes and potatoes grow side by side on the plot, it is imperative to spray both crops with boric acid.

Signs of boron overdose in plants

Excessive use of the substance is dangerous to plants. You can understand that there is too much boron in the soil by the following signs:

• leaves of garden and horticultural crops have become unnaturally glossy;
• the edges of the leaf plates bent inward, and the middle protruded upward;
• the greens in the lower part of the plants closer to the ground began to dry out and fall off.

With an excess of boron, the leaves of crops bend and shine unnaturally

To correct the situation, the plants need to be urgently fed with potassium, and a week later fertilized with nitrogen.

Conclusion

The use of boric acid in the garden and vegetable garden helps to strengthen the endurance of crops and increase yields. You can also use the substance from pests, for them it is poison.

Recommended entries

Fertilizer Zircon

How to water seedlings with hydrogen peroxide

Fundazol

Fungicide Luna Senseishen, Experience

Fungicide Bayleton

Fungicide Benorad

Pig manure as fertilizer: how to use it in the garden, reviews

Granular horse manure: instructions for use, reviews

Fitolavin: instructions for use for plants, reviews, when to process