Content
- 1 Benefits of treating a polycarbonate greenhouse in spring with copper sulfate
- 2 Recommended timing
- 3 How to dilute copper sulfate for greenhouse processing
- 4 Greenhouse processing in spring before planting with copper sulfate
- 5 Cultivation of the land in the greenhouse with copper sulfate in spring
- 6 Precautions
- 7 Conclusion
The greenhouse is an excellent protection of plants from unfavorable weather conditions, but at the same time insects, microorganisms and other bacteria can penetrate into it quite quickly, which can cause significant harm to the grown vegetables. Greenhouse processing in spring with copper sulfate is used when it becomes necessary to disinfect the soil and polycarbonate greenhouse. As a rule, processing is done after the summer cottage season has come to an end or early in the fall, before the start of sowing work - about 14 days. Copper sulfate is an excellent home remedy when it is impossible to achieve the desired result with water.
Benefits of treating a polycarbonate greenhouse in spring with copper sulfate
The benefits of this type of treatment in the spring are simply undeniable. Thanks to the use of a solution based on copper sulfate, it is possible to get rid of a large number of pathogens of various types of diseases during the processing of a polycarbonate structure, among which are the following:
- late blight;
- blackleg;
- fungus;
- septoria;
- monoliosis;
- phytosporosis.
In addition, it is possible to destroy all existing harmful insects and their larvae. As practice shows, it is quite easy to process the structure, everyone can handle the work. In addition, do not forget that the best treatment for many diseases is prevention, and copper sulfate is the best suited for these purposes.
Recommended timing
If it becomes necessary to process the elements of a polycarbonate greenhouse, then all work should be carried out after the sowing work has come to an end. For these purposes, a solution of the required concentration is prepared and all elements of the greenhouse or greenhouse are sprayed.
In most cases, the land is cultivated several weeks before the planned date of planting planting material. During the work in the greenhouse, there should be no plants, as they may die. Particular attention should be paid to the concentration of the drug used, since there is a high probability that significant damage will be done to the earth. It is best to adhere to a step-by-step algorithm of work, as a result of which it will be possible to quickly achieve the desired result and effect.
How to dilute copper sulfate for greenhouse processing
In order to perform the processing of a structure made of polycarbonate sheets and a primer based on copper sulfate, it is recommended to properly prepare a solution. If it is planned to process the soil, then it is worth taking into account the fact that the concentration of the drug should be much lower. This is due primarily to the fact that copper sulfate is able to increase the acidity of the soil, have a negative effect on the nutrient soil.
Before starting work, it is recommended to first remove all remaining vegetation from the greenhouse, disinfect the used tool, containers intended for irrigation, and containers for planting planting material. Only after that you can start cultivating the soil. Add 50 g of copper sulfate to a bucket of water.
In order to process a polycarbonate structure and a frame made of metal or plastic, it is necessary to prepare a solution from the following proportions: 100 g of the drug in a bucket of water.
The algorithm of actions is as follows:
- The powder is preliminarily dissolved in a small amount of warm water.
- Bring the concentration to the desired level by adding the required amount of water.
- In order for the effect of adhesion of the solution to the material to be higher, you can add a small amount of liquid soap - 150 g.
After the solution is ready, you can start working.
Greenhouse processing in spring before planting with copper sulfate
Before starting planting work, it is recommended to pre-process the polycarbonate structure with a solution based on copper sulfate.
In the process of work, it is recommended to adhere to the following step-by-step work algorithm:
- The first step is to take care of personal safety measures and wear rubber gloves.
- In order to process walls, ceilings, wooden floors and greenhouse partitions, you can use a 10% solution. That is, 100 g of the drug will need to be dissolved in 10 liters of pure water. Water must be heated to 50 ° C.
- Before proceeding with the process of applying the prepared solution to the surface of the greenhouse, it is recommended to pre-clean all structural elements with household chemicals, and perform wet cleaning. This is necessary in order to remove the existing dirt, dust, debris. If the greenhouse has wooden structures, then many experts recommend pouring boiling water over them, due to which the effectiveness of copper sulfate will significantly increase.
- It is best to use a spray bottle to apply the solution. Before using the solution, it should be filtered using nylon fiber for these purposes. In some cases, the composition is applied with a brush, after which the procedure is repeated when the composition is dry.
The greenhouse must be re-treated in the same way after 4 months.
Cultivation of the land in the greenhouse with copper sulfate in spring
Soil cultivation in a greenhouse in spring with the help of copper sulfate is used by many summer residents, since this method does not take much time, everyone can do the work, and most importantly, this method of cultivation is quite effective and does not require large expenses. To achieve the desired result, it is important to understand exactly how to perform all the actions and dilute the solution.
Disinfection of the soil is carried out before sowing begins. As a rule, this is done 7 days before the expected time of disembarkation of the planting material. For these purposes, you need to take 1 liter of clean water and dissolve 30 g of the drug in it, and then water the earth.
In order for the powder to dissolve completely, it is recommended to preheat the water to 50 ° C. Inside the greenhouse, in the soil, they make small grooves and pour them abundantly with a solution based on copper sulfate. In the event that the soil is infected with late blight, a tick or a black leg, then this procedure must be repeated, then only in combination with other chemicals. As practice shows and the advice of many experts, it is best not to use such contaminated lands for planting plants. It is recommended to cultivate the soil with a 3% solution.
Precautions
Before starting the process of processing a greenhouse made of polycarbonate material and earth, using a solution based on copper sulfate, it is recommended to take into account the fact that you will have to come into contact with a sufficiently toxic substance. It is for this reason that it is so important not to forget about personal safety measures.
In this case, you will need to use rubber gloves. In addition, it is not recommended to rub the eyes and mucous membranes while working in the greenhouse.In the event that, for some reason, the drug gets into your eyes, you should immediately rinse them with plenty of cold running water. When all the work is completed, it is necessary to remove the gloves, dispose of them, and wash your hands thoroughly with warm water and soap.
Conclusion
Processing a greenhouse in spring with copper sulfate is a fairly effective way to combat harmful insects, bacteria, fungus and mold. As practice shows, you can prepare a solution and carry out all the work yourself - there should be no difficulties. In addition, do not forget about the precautions when working with drugs. If you adhere to the step-by-step algorithm of work, advice and recommendations of specialists, then it will be quite easy to achieve the desired result, and the greenhouse will be reliably protected.
