How to make a vertical petunia flower bed

A vertical flower bed is a fun way to decorate your yard and garden. Photos of such compositions can often be seen on the websites of professional landscape designers.

How to quickly decorate your yard, how to create vertical flower beds for petunias with your own hands - this is about this in this article.

Varieties of vertical flower beds and flowers for them

Before building a vertical flower bed, you need to decide on its design. By the method of fastening and the type of support, they are distinguished:

• hanging flower beds;
• ground structures;
• wall compositions based on walls;
• wall beds, fixed on the surface of the walls.

Any of these compositions goes well with such an ampelous plant as petunia.

Petunia as a flower bed decor is suitable for several parameters:

1. The plant is unpretentious.
2. It takes root well and quickly, retaining an earthen lump between the roots.
3. Does not require special care, except for watering and feeding.
4. Can grow in confined spaces with little substrate.
5. The variety of varieties, shades and varieties of petunias allow you to create a unique composition that can decorate any landscape.
6. It develops equally well in partial shade and in the sun. It tolerates direct sunlight well, but does not like shadows.
7. Blooms throughout the summer season.

To build a vertical flower bed, you do not need large material investments, and it will not take too much time. You can create such a composition from any available materials, spending only half an hour.

In principle, it is possible to build vertical flower beds and flower beds from anything - it all depends on the imagination of the performer.

Vertical flowerbed made of mesh

Metal mesh is often used to create vertical flower beds. There are several ways to create such a flower garden for petunias:

Mesh plus stones

This method perfectly emphasizes the beauty of the landscape, which includes alpine slides, parapets or steps made of natural stones, various reservoirs decorated with cobblestones. To implement such a project, the mesh must be bent in the form of a snail, and there should be two layers - these are identical galvanized meshes running parallel to each other at a short distance. Stones are poured between the grids: it can be pebbles or larger stones - here it all depends on the size of the grid cells. Soil is poured into the free space inside the "snail", it is here that the seeds are planted or seedlings of petunias.

Mesh, flowerpot, geotextile

A cylinder is twisted from a mesh with small cells. You can fix the shape with plastic clamps or wire. The cylinder is placed inside a large pot or flowerpot. Geotextile or other black fabric is lined from the inside of the cylinder. Now the form is covered with soil, the free space of the flowerpot is also filled with earth. Holes are cut through the mesh in the textiles; it is better to arrange them in a checkerboard pattern. Use your finger to deepen the soil through the hole and plant the seedlings of petunias there.After a while, the plants will cover all the free space, and the cylinder will look like a blooming pillar.

Flowerbed from a plastic pipe

A vertical flower bed from a pipe can also be different - it all depends on what the owner of the site needs.

If the goal is to decorate an unsightly wall of an economic building or a neighbor's fence, a method that involves cutting the pipe lengthwise is more appropriate. For these purposes, any plastic (water or sewer) pipe is suitable. It is necessary to cut a piece of the required length, cut the pipe lengthwise into two equal parts - you will get two full-fledged vertical flower beds.

The side parts of the pipe must be closed with plugs, after which the pipe must be suspended or attached to a vertical surface and the improvised flower bed must be filled with soil. It remains only to sow the petunia.

The second method involves cutting the pipe across. In appearance, such a flower garden is very similar to a flower bed made of mesh and geotextiles. In this case, two pipes of different diameters are needed: one is large and the other is smaller.

Holes must be made in both pipes:

• in a large pipe - for a petunia;
• in a small one - for water.

The large pipe is dug into the ground or fixed vertically in any other way. A smaller pipe is installed inside it. The free space between the walls of the pipes is filled with the substrate for petunias, mixed with the seeds of this ampelous plant.

Vertical bed of flower pots

For this method, you can use not only new flower pots, but also any containers that can be found in the house or on the site. It can be leaky pots, old buckets, etc. The main thing is to properly arrange the flower bed, maintain a style consistent with the landscape, and also choose containers of different diameters (from larger to smaller).

Another irreplaceable part in this method is a metal or wooden rod, the length of which should be slightly larger than the estimated height of the flower bed.

First, the largest pot (or other container) is installed in the place selected for the vertical flower bed. Through the hole (available or made with your own hand), a rod is inserted into the bottom of the pot, the lower part of which, for better fixation, must be thrust into the ground as deeply as possible.

Now it remains to string the rest of the containers onto the rod, collecting something like a children's pyramid. Soil is poured into all pots and petunias are planted. Such vertical flower beds for petunias look more beautiful if plant varieties with long stems are selected - hanging flowers will cover the unsightly part of the structure.

Do-it-yourself flower beds from improvised means

You can use anything:

• old shoes;
• bags or linen bags;
• plastic or glass bottles;
• old furniture (chairs, dressers);
• unnecessary dishes.

One of the easiest ways is to make vertical flower beds with your own hands from car tires.

To implement this idea, tires must first be prepared: wash, dry, paint with bright colors.

Now a tower, pyramid or any other vertical structure is being built from the wheels. The resulting "structure" is filled with soil and the seeds of petunias are planted there.

This simple design, not only will not cost the owner of the site, but will also help to rid the garage of unnecessary trash.

Benefits of vertical flower beds

You can endlessly talk about how to make a vertical flower bed with your own hands - there can be a lot of ideas for such a flower garden.

The popularity of vertical flower beds is due to their versatility, because these designs:

1. They take up a minimum of space, which is very convenient for small yards, terraces, gazebos and areas where there is no way to break an ordinary flower garden.
2. Conveniently serviced - you don't have to pull a long hose to water the flower garden - just leave it near the flower bed.
3. Quickly assembled and disassembled for storage until next season.
4. Can be used multiple times.
5. Easily transported to another location on the site.
6. They look impressive and unusual.

Vertical flower beds need to be watered and fertilized more often than regular flower beds.

There are a million answers to the question of how to make a vertical flower bed. Anyone who has at least a little imagination and a little desire can build such a structure with their own hands.

Recommended entries

Creeping flowers perennials: photo with the name

Low-growing perennials for flower beds, blooming all summer

Curly perennials blooming all summer

Shade-loving perennials blooming all summer

Garden loaches perennials

Sun-loving perennials for the garden

Petunia Spherica F1

Petunia seedlings stretched out: what to do

How to collect terry petunia seeds