Birch sap champagne: 5 recipes

In recent years and even decades, truly high-quality alcoholic beverages have been hard to find on the market. It is especially easy to run into a fake when it comes to champagne. For this reason, home winemaking in Russia is literally experiencing a rebirth. There is a particular demand for drinks made from natural products. Making champagne from birch sap at home is a snap. And the taste of the resulting drink will delight both the female and male half of humanity.

How to make champagne from birch sap

Birch sap is the main ingredient for making this amazing, refreshing drink in any weather. This natural health elixir can only be obtained for 2-3 weeks a year. But this does not mean at all that champagne can be made from it only in early spring in a very short time. Canned birch juice is also suitable for making champagne. Moreover, for light varieties of the drink, it is better to use the juice collected and then saved with your own hands. But if it was decided to make a stronger champagne with the addition of vodka, then there is no particular difference what juice will be used to make champagne. You can also use the store version.

For the preparation of champagne from birch sap, sweeteners are necessarily used, most often ordinary granulated sugar. To increase the usefulness of the resulting drink, honey can also be used. It usually serves to add a deeper, richer shade to champagne. Especially if you use dark types of honey, such as chestnut, mountain or buckwheat.

As a starter for champagne, you can use both industrially produced wine yeast and homemade raisins.

Typically, homemade sourdough is prepared a few days before the champagne process begins. This is necessary not only for the leaven to mature. Recently, almost any raisins found on the market are treated with sulfur for better preservation. Such raisins are already completely unsuitable for making wine sourdough. Therefore, the raisin sourdough is made in advance in order to experiment with different varieties of the extracted dried fruit. And as a result, determine which one is really suitable for fermentation.

The process of making wine sourdough at home is as follows:

1. In a clean glass jar, mix 100 g of necessarily unwashed raisins (to keep the "wild" yeast on the surface of the berries), 180 ml of warm water (or birch juice) and 25 g of sugar.
2. Mix well, cover with a piece of cloth (clean towel) and leave in a warm place without light for several days.
3. When foam appears on the surface, accompanied by a slight hiss and a sour smell, the leaven can be considered ready.

In a tightly closed jar, it can be stored in the refrigerator for 1 to 2 weeks.

For making champagne from birch juice at home, fresh lemons or citric acid are often used. For recipes without the use of wine yeast, or even more so other alcoholic beverages, such an additive is required. Since the juice from birches contains practically no acids, and they are needed to stabilize the acidity of the wort. Without this normal fermentation process will not take place.

Recipe for champagne from birch sap with raisins

To get light and at the same time rich and very tasty sparkling wine (champagne) from birch sap you will need:

• 12 liters of juice, preferably fresh;
• about 2100 g of granulated sugar;
• 1 large lemon (or 5 g citric acid);
• pre-prepared homemade wine sourdough from 100 g of raisins;
• 50 g of dark honey.

The very process of making champagne from birch sap with raisins according to this recipe consists of two stages: preparing the wine itself and saturating it with carbon dioxide by adding sugar and ensuring secondary fermentation in airtight conditions.

Manufacturing:

1. Birch sap, 2000 g of sugar and citric acid are mixed in a large enamel container. Fresh lemon is simply squeezed out of juice, carefully separating the seeds.
2. Heat everything until it boils and boil it over low-moderate heat until only 9 liters of liquid remain in the pan.
   
   Comment! This process makes the taste of the drink richer and more interesting.
3. Cool the liquid to room temperature (+ 25 ° C) and add raisin sourdough and honey, melted, if necessary, in a water bath to a liquid state.
4. Mix thoroughly, pour into a fermentation container and install a water seal (or a latex glove with a small hole in one of the fingers) on it.
5. Leave in a place without light with a stable warm temperature (+ 19-24 ° C) for 25-40 days.
6. After the end of the fermentation process (the disappearance of bubbles in the water seal or the falling off of the glove), the birch sap wine is ready to be saturated with carbon dioxide.
7. Through a tube, the wine is carefully poured from the sediment and poured into prepared clean and dry bottles with tightly screwed caps, leaving about 6-8 cm of free space in the upper part.
8. Add 10 g of sugar to 1 liter of each bottle.
9. The bottles are hermetically screwed with lids and placed again in the same place for 7-8 days.
10. After a few days, bottles of future champagne must be checked and gases must be slightly released by opening the opening.
11. Or they can be taken out for storage in a cold place, otherwise they can simply burst from the accumulated pressure.

The strength of the resulting champagne is about 8-10%.

Champagne from birch sap without boiling

If you want to preserve all the beneficial properties of birch sap in champagne, then you can use the following simple recipe.

You will need:

• 3 liters of juice;
• 900 g sugar;
• 300 g unwashed raisins;
• 2 oranges;
• 1 lemon.

Manufacturing:

1. Oranges and lemon are thoroughly washed with a brush, dried and the zest is cut off from them. Juice is squeezed out of the remaining fruits through a strainer to separate the seeds.
2. The birch sap is slightly heated to a temperature of + 40-45 ° C and all the sugar is dissolved in it.
3. In a fermentation vessel, birch sap is mixed with sugar, juice and citrus zest, and raisins are added.
   Comment! It is necessary to be completely confident in the fermentation properties of the raisins used, using the above techniques, otherwise you can spoil the entire workpiece.
4. A water seal or a glove is installed and placed in a warm, dark place for 30-45 days.
   
5. Then they act in the standard way already described in the previous recipe. Only in each bottle, instead of sugar, 2-3 raisins are added and also hermetically sealed.

Champagne turns out to be even lighter and less saturated in taste. But there is still a degree in it, and it drinks well, especially in hot weather.

Champagne from birch sap with wine yeast

Wine yeast is used when there is no suitable raisins for sourdough, but you want to get a guaranteed delicious and sparkling wine.

All manufacturing technology is absolutely identical to that described in the above recipes.

The ingredients are used in the following proportions:

• 10 liters of birch juice;
• 1600 g sugar;
• 10 g wine yeast.

Homemade champagne made from birch sap with the addition of dry wine

The technology for making champagne according to this recipe also resembles the traditional one described above. Grape wine adds the beneficial properties of grapes, its taste and color to the finished drink.

You will need:

• 12 liters of birch sap;
• 3.2 kg of granulated sugar;
• 600 ml of white wine;
• 4 lemons;
• 4 tbsp. l. diluted in water according to the instructions attached to them wine yeast.

Manufacturing:

1. Birch sap, as usual, is evaporated with sugar up to 9 liters.
2. Cool, add all remaining ingredients and keep in a warm place until fermentation ends.
   
3. Then it is filtered, poured into bottles with tight lids and kept for about 4 weeks in a cool place.

How to make champagne from birch sap with the addition of vodka

You will need:

• 10 liters of birch sap;
• 3 kg of sugar;
• 1 liter of vodka;
• 4 tsp yeast;
• 4 lemons.

Manufacturing:

1. The first stage, traditional, is boiling of birch sap with sugar until it is reduced in volume by 25%.
2. Then the juice boiled down and cooled to room temperature is poured into a wooden barrel of a suitable volume so that there is room in it in the upper part for fermentation.
3. Add yeast, pitted lemons, and vodka.
4. Stir, close with a lid and leave in a warm place for a day, then transfer the container to a cool room (cellar, basement) for 2 months.
5. At the end of this period, champagne is bottled and sealed tightly.

How to store homemade birch sap champagne

Homemade champagne must be stored in the cold, at temperatures from + 3 ° C to + 10 ° C and without access to light. Slight sediment may occur at the bottom of the bottles. The shelf life in such conditions is 7-8 months. However, a drink with the addition of vodka can be stored in such conditions for several years.

Conclusion

Homemade birch sap champagne can be prepared in several ways. And in any case, you will get a tasty and moderately strong sparkling wine with incomparable taste, which is not a shame to present to any festive feast.

Recommended entries

Wine from grape leaves at home

Lime tinctures: vodka, alcohol, moonshine

Pouring peaches at home

Lemon tincture: vodka, alcohol

Braga on birch sap: recipes, proportions for moonshine

Bird cherry amaretto at home

Corn mash

Peach tincture

Mulberry moonshine