How to make a quail feathering machine

Have you ever tried cleaning a bird from feathers with your own hands? Everyone knows how painful and lengthy this process is. It is good when you need to pluck one bird. And if we are talking about a large number of goals? Then the work can take several days. It is especially difficult to pluck quail. They are small and the work is quite meticulous. But what if we tell you that there is a special quail feathering machine that will allow you to do all the work in a few minutes?

Are you surprised? With this unit, poultry farmers pluck a large number of poultry heads quickly and effortlessly. How exactly does the machine work and work? Does she pluck the bird well? How to make it yourself.

How the Feathering Machine Works

Based on the name, it becomes clear that the device cleans the bird's carcass from feathers. And if you can handle one or two birds with your own hands, then with a lot you need to sweat. This is where such a feathering machine comes in handy. Outwardly, it resembles a small top-loading washing machine. The main part of the structure is the drum. On its bottom and walls, special fingers are installed, thanks to which the bird is plucked.

There is no rigid connection between the machine drum and the bottom. These are separate movable elements. A special tray is made at the bottom of the structure. Water will drain into it and removed feathers will accumulate. The heart of the whole structure is a single-phase motor, the power of which reaches 1.5 kW. Due to the work of the motor, the drum inside begins to spin, a centrifuge is created and the carcass rotates inside. And since rubber fingers are built into the bottom and in the walls, feathers are plucked from the quail during twisting. So the process is as follows:

  1. You plug the plunger into a power outlet.
  2. The bottom of the drum starts to spin quickly.
  3. You throw in a few quails.
  4. They are rotated by a centrifuge.
  5. Thanks to rubber fingers, quails get rid of feathers.
Advice! While the quails are moving in the car, you must water them with hot water. She will wash the down and feathers pulled from the carcass and bring them to the tray.

In 30 seconds in the machine, you can process several quails. How many heads can you pluck in 10 minutes or half an hour? After all, this is exactly how much time it takes to manually pluck. At the same time, the plucking is very high quality. You will not find any remaining feathers. We can say with confidence that such equipment pays off. Watch this video to see the whole process of the feathering machine.

DIY feathering machine

The new equipment comes at a high price. Many people cannot afford that kind of pleasure. However, as you can see, the design of the machine is quite simple. You can easily make such a unit with your own hands. Here are the details you need:

  • good motor;
  • cylinder (large saucepan, washing machine drum), the width of which is 70 cm and the height is 80 cm;
  • beels - those rubber fingers that pluck quail, about 120 pcs.

The motor and the beaters for the car are the most expensive parts of the structure. But you can save a lot if you have an old washing machine of this type at home.

Then you just have to buy quail beaters, about 120 pieces, and make the bottom of the car. It is necessary to cut out a special plate, the width of which will be identical to the activator of the machine. After that, holes must be cut in this plate, the diameter of which is the same as that of the rubber beats.It remains to insert the beats into place and the bottom of the car is almost ready. An identical hole is made exactly in the center of the activator and the plate. Only here you need to cut a thread in the activator, where the axle will be inserted. So, you can connect the plate and the activator by synchronizing them.

Now take a plastic bucket with a bottom diameter slightly larger than the plate. It should fit in a typewriter. Cut out the bottom in it and make holes in the walls for the beats. Lock them in place.

Advice! Don't make the bottom row hitting close to the bottom. The height of the first row should start where the height of the row ends at the bottom.

Now put the bucket in its place and fix it by attaching it to the walls of the washing machine. Now you need to make a hole in the bottom of the drum through which all the water and feathers will come out. That's it, your quail plucking machine is ready.

Detailed instructions are in this video.

Conclusion

Such a quail plucking machine is an indispensable thing in the household if you are breeding birds. Based on numerous reviews, purchasing or building such a unit with your own hands is an excellent solution that will allow you not only to save energy, but also a lot of time. There is no one who would regret buying such a car. If you ever try what it is, then you will also understand that you cannot do without such a thing on the farm.

Give feedback

Garden

Flowers

Construction