Content
Summer mowing of grass is a common occupation for owners of personal plots. The Husqvarna petrol brush will help to make the process as convenient as possible, the operation of which is not difficult. Information about the device and technical characteristics of the Husqvarna petrol cutter will facilitate the introductory stage and help you quickly get used to it in the initial stages of use.
Purpose and technical characteristics of petrol cutters
The use of a self-propelled petrol mower does not guarantee a high-quality result of work in the presence of hard-to-reach places on the garden plot, uneven ground or the presence of numerous obstacles in the form of plantations or hemp. In such cases, a manual trimmer will come to the rescue. Among the numerous models, experts recommend paying attention to the product of the Swedish company to the Husqvarna 128r petrol cutter.
The Husqvarna brushcutter is designed for working in small and medium-sized areas. It is indispensable when it is necessary to remove grass in the area of curbs and flower beds. The predecessor of the 128r model is the Husqvarna 125r brushcutter, the high resource of which, combined with an affordable price, attracted a wide range of buyers. The result of minor modifications to the design of the petrol cutter over the course of two years was an improved design in the form of the Husqvarna 128r model.
Main technical characteristics of petrol cutters:
Characteristics | Model 128r |
|---|---|
Engine power | 0.8kW, which is equivalent to 1.1hp. |
Maximum rotation speed | 11000 rpm |
Cylinder volume | 28cm cube |
Maximum permissible processing width in 1 pass | 0.45 m |
Machine weight (excluding guard, cutting parts and fuel) | 4.8KG |
Tank volume for Husqvarna petrol cutters | 400 ml |
Fuel consumption | 507 g / kWh |
Rod length | 1.45 m |
Knife diameter | 25.5 cm |
Husqvarna brushcutter noise level | About 110 dB |
Quick start-up of Husqvarna petrol cutters after long periods of inactivity is ensured by the Smart Start system and primer for priming fuel. The straight bar and the shape of the handles, identical to the bicycle, allow for better control of movements during operation. Compared to curved lines, a straight brush cutter bar is considered more reliable. Folding bike handles make it easy to transport your Husqvarna brush cutter. Fuel level control is available thanks to the white plastic fuel tank of the brushcutter. To bring the unit into working condition, it is enough to pull the cord without too much harshness. The Husqvarna 128 r requires 40% less starting effort.
The device of petrol cutters and preparation for work
The Husqvarna 128 r brushcutter is equipped as follows:
- a knife with four blades is intended for removing tall and tough grass, as well as small bushes;
- semi-automatic trimmer head;
- rod and protective cover;
- bicycle handle;
- set of keys;
- shoulder straps for carrying the Husqvarna 128 r.
The operation of the Husqvarna brushcutter with the use of a fishing line is possible only for mowing small grass.
Putting together the Husqvarna petrol cutter will help the user manual or the recommendations below, following which the process will take no more than a quarter of an hour:
- Initially, the manual control post is fixed in place with two screws.
- The cables are connected.
- The handle is also mounted on the Husqvarna brushcutter column using screws.
- Further, a protective shield is attached to the Husqvarna brushcutter, the task of which is to reduce pollution from the mowed grass.
For the engine of the Husqvarna petrol cutter to work, it is necessary to prepare a mixture of 1 liter of Ai92 gasoline and 50 gr. special oil, after which it is poured into the tank. At the beginning of a cold start, open the throttle three-quarters with the control handle.
To prevent the Husqvarna brushcutter from damaging the surrounding objects or the master himself, it is placed in a safe position before starting work. Then you can pull the recoil starter cord. At the very beginning of the process, the procedure must be repeated 3-4 times. As with all new engines, the Husqvarna brushcutter unit needs a break-in. To do this, he must work for a quarter of an hour at idle. Then you can go directly to mowing the grass with a brushcutter.
Features of operation
To make the use of your Husqvarna brushcutter as comfortable as possible, the following tips will help:
- Before mowing, adjust the harness to achieve the correct fit.
- It is optimal when, after adjustment, the body of the Husqvarna brushcutter does not reach the soil surface by 10-15 cm when the arms are bent, working without the suspension system is not only burdensome, but also significantly increases the risk of injury.
- There is a lot of noise from a Husqvarna petrol cutter at work, which creates some discomfort. The use of a helmet or headphones can help reduce the side effect.
Within an hour, the unit is able to mow grass on a plot of about 2 acres. Taking into account the breaks necessary for cooling the engine of the Husqvarna brushcutters, it will be possible to clean the area with the classic six hundred square meters in 4 hours.
It is quite possible to carry out minor breakdowns of Husqvarna petrol cutters yourself. If there is a problem with ignition, candles deserve attention. If they are dry, it is worth trying to adjust the carburetor. Perhaps the situation is provoked by the incorrect start of the Husqvarna petrol cutter. Carefully re-examining the instruction manual will help fix the problem. It is not difficult to change the air filter of the brushcutter, which is prone to clogging over time. It is better to entrust the elimination of more complex breakdowns to professionals.
With regular maintenance inspections, timely replacement of damaged parts and adherence to the operating conditions, the Husqvarna brushcutter will last a long time.
