Content
- 1 Features and advantages of the method
- 2 Disadvantages of planting potatoes with combs
- 3 Site preparation
- 4 Preparing tubers for planting
- 5 Planting potatoes in the ridges using Dutch technology
- 6 Care and harvest
- 7 Planting potatoes in the combs in the classic way
- 8 Harvesting and site preparation
- 9 Conclusion
- 10 Testimonials
Ridge Planting potatoes quickly gained popularity. Even beginners in the gardening business can master this method. Planting in this way saves time and does not require expensive equipment. Many gardeners have been planting potatoes this way for a long time and are very happy with the results. But in order to properly land, you need to know some of the features and nuances of this method. With the help of this article, we will learn how to plant potatoes in the ridges, learn all the advantages and disadvantages of this method, and also see how to properly care for the beds.
Features and advantages of the method
Planting potatoes in this way involves a special way of preparing the soil. Manually or walk-behind tractor ridges are prepared in which potatoes are planted. They must rise above the ground. This allows the tubers to thrive and yield a more generous crop as a result. In a normal planting, the soil squeezes the potatoes, which interferes with full-fledged growth. therefore landing potatoes in the ridges are considered a more productive method. Of course, it has both pros and cons.
The most important benefits include increased yields and ease of tillage. Due to the fact that the soil does not squeeze the potatoes, the tubers can grow without obstacles. This greatly affects the amount of the harvested crop.
It has also become much easier to handle the beds. Since the planting is more shallow, the soil does not need to be plowed deeply. You can simply loosen the upper part of the soil, and then use the glanders to cover the tubers with earth. This method is especially valuable for planting potatoes on heavy and moist soil. Since it is difficult to handle by hand, a ridged fit will do just fine. Moreover, if potatoes can grow freely in loose soil, then in heavy soils it will not have enough space. To prevent potatoes from falling ill with late blight, they need a sufficient amount of light. The ridges warm up much better, and thanks to this, the potatoes will grow healthy and strong.
Disadvantages of planting potatoes with combs
One disadvantage is that the soil in the ridges dries out very quickly. Especially in regions with hot climates, this can cause some inconvenience. In such cases, you cannot do without regular watering. And since usually potatoes are planted more than other crops, it will take a lot of water. This nuance does not allow residents of the southern regions to use the ridge planting method. Most often it is used in areas with wet soil or in cold regions. Of course, if it is possible to water frequently, then you can plant potatoes in this way and in warm places. Industrial plants can equip an automatic irrigation system.
Too light and crumbly soil will not work for this method. It will be very difficult to form ridges from it, because the soil will constantly crumble and erode. Another reason is that such soil dries out even faster, and the tubers may simply burn out in the sun.
Site preparation
To plant successfully, you need to properly prepare the soil. This preparation involves several stages:
- Loosening the soil.
- Fertilizer.
- Deleting weeds and plant residues.
- Destruction of pests.
All of these points are very important. Only by completing them, you can achieve a good result of your work. It is also important to have time to complete the deadline so as not to start planting potatoes too late. Or, conversely, start preparation very early, when the soil has not yet dried out and cannot be processed.
Begin soil cultivation by loosening it. With this planting method, only the top layer of soil needs to be loosened. If you are digging a garden by hand, then you only need to deepen the shovel by 1/3 of the entire length of the bayonet. After the done, loosening and leveling of the soil are carried out. Choose in the garden those places for planting tubers where legumes such as peas, soybeans, beans grew last year. They enrich the soil with substances necessary for the growth of potatoes.
The next step will be soil fertilization. For these purposes, you can use both mineral and organic fertilizers. In this matter, the main thing is to know when to stop. An excess of organic matter can lead to late blight, and an excessive amount of mineral fertilizers can burn the roots of plants. The main components of fertilizers should be phosphorus and potassium. Choose fertilizers in specialized stores that contain these substances. You can use superphosphate, potassium nitrate, wood ash and bone meal.
Before planting tubers, you need to get rid of pests and diseases that may appear in the future. The most dangerous for potatoes, like for many other vegetables, is late blight. This and other hazards can be avoided by treating the soil with fungicides and pesticides. It is very important to use these chemicals as directed to avoid contaminating or damaging the soil.
Preparing tubers for planting
Before planting, tubers must be removed from the cellar and carefully sorted out, all rotten potatoes must be thrown out. For planting, only tubers are left without cracks and flaws. They should not be lethargic and sprouted. Choose only the best varieties that have high yields for planting in your garden. Such preparation is very important, because by planting unusable potatoes, you will simply waste time and space on the site.
Planting potatoes in the ridges using Dutch technology
You can plant potatoes using the ridge method in different ways. There is a classic and Dutch technology. Dutch way requires more effort, however, is considered more productive. Planting this method will increase the yield of potatoes. To do this, it is necessary to observe the planting time and the time for collecting potatoes. It is also very important to prepare tubers for planting on time, and carry out other preparatory robots.
When the site is already prepared, you need to get the tubers for planting, and plant them in the ground. Moreover, the potatoes are placed very densely, at 1m2 there should be up to 35 tubers. When 5–7 eyes appear on the tubers, they are dug out and re-selected suitable for germination.
The tubers can be germinated or simply left in a warm place. Adequate sunlight will speed up the growth process. Sprouted potatoes are planted to a depth of about 4 centimeters. Up to 35 centimeters are left between the bushes. The distance between the rows should be at least 80 cm. After that, manually or with a walk-behind tractor, the soil between the rows is poured onto the tubers. The height of the combs should be between 20 cm and 30 cm.
Care and harvest
This planting method makes it easier to care for the beds. Preliminary preparation helps to ensure that in the future you will not have to spend a lot of time in the garden. The site does not need to be weeded, and treated with insecticides or fungicides. The only thing the garden needs is timely watering.
When the time comes to harvest the potatoes, the ridges are ripped open and the ripe tubers are taken out. After that, the soil must be leveled so that it is prepared for further processing. Do not forget that, like planting in another way, you can plant potatoes using the Dutch method in one place only once every 3-4 years.
Planting potatoes in the combs in the classic way
This method is often used by gardeners whose plots are located on moist clay soils. Such dense soil does not allow potatoes to grow normally, and also threatens the development of late blight. As you know, this disease can completely destroy the crop. Therefore, the ridge planting method in this case is a real salvation.
To begin with, rows are marked on the site. This is done with twine. It is stretched where the middle of the row should be. Each next rope is pulled at a distance of at least 1 m from the previous one. Further along this rope, the tubers are laid out at a distance of about 30 centimeters. Cutting the combs for planting potatoes is carried out using a conventional glanders. This method does not require the use of expensive equipment, therefore it is available to absolutely everyone.
The height of the ridges should be about 25-30 cm, and the width between the rows should be about 65 cm. Further care consists in regular watering as needed. From time to time, it will be necessary to restore the ridges by simply giving them their previous shape with a hoe.
Harvesting and site preparation
Collect the potatoes by hand by simply sliding the top of the comb and collecting the tubers. Thanks to this method, you can harvest potatoes without much physical effort.
Further, the ridges are leveled and grass and leaves are laid on the ground. Overheating over the winter, they will be an excellent fertilizer. The next year, it is better to plant various legumes in this area. This will restore soil fertility.
Conclusion
The advantages of this method of planting potatoes clearly outweigh the number of disadvantages. Therefore, many gardeners have been using it on their plots for many years. Having seen all the technology and features of this method, you can personally experience how much the yield of potatoes will increase, and how easy it will be to care for it.
