Content
Planting and caring for boxwood is an interesting question for those who like to grow unusual plants on their own plot. Evergreen boxwood can become a garden decoration, so it is useful to study a photo of a boxwood shrub and caring for it.
Growing conditions for boxwood
Boxwood is a very beautiful, slow-growing evergreen shrub that can beautify any space. Boxwood grows throughout the world, both wild and cultivated, but most often it can be seen in warm regions. On the territory of Russia, boxwood is widespread in the Caucasus and Sochi; in the world it grows mainly in tropical zones.
This is due to the fact that the shrub is characterized by increased thermophilicity. In general, boxwood is quite unpretentious, but certain conditions must be observed when growing it.
- The plant grows poorly in poor soils. For boxwood, it is necessary to create a nutritious neutral or slightly acidic soil with a high lime content, otherwise the shrub will develop poorly and will not be able to achieve maximum decorative effect.
- The shrub does not tolerate direct sunlight. For healthy development, it definitely needs shading, especially in the cold season, since the bright winter sun is very dangerous for the shrub.
- The plant is thermophilic, it is with this that the difficulties of breeding in the middle lane are associated. Planting and caring for evergreen boxwood can be carried out not only in the suburbs, but even in the Urals and Siberia, but you need to monitor the plant very carefully, otherwise the shrub will die from severe cold weather.
You can decorate almost any site with an evergreen plant, even in the northern regions of the country. However, gardeners need to remember that we are talking about growing a southern plant with special requirements for conditions.
When to plant boxwood outdoors
Evergreen boxwood is a very early flowering plant - small flowers appear on its branches in early March. Therefore, for the most part in the middle lane, boxwood is planted in the fall; seedlings are placed in open ground in mid-September or early October, about a month before the first frost.
It takes about 4 weeks for the boxwood root system to develop in a new location in the open field. After that, with proper care, the shrub calmly tolerates winter and pleases with flowering at the beginning of spring.
How to plant boxwood
Its further growth and decorativeness largely depends on the correct planting of the shrub. When planting a plant in the ground, it is necessary to take into account the shrub's requirements for soil, lighting and proximity to other horticultural crops.
Where to plant boxwood
The boxwood shrub is a heat-loving plant, but it does not tolerate direct sun well. It is recommended to select a site for a shrub that is shaded or at least slightly shaded so that the sun's rays do not injure the leaves of the plant.
Boxwood thrives in the shade of buildings and fences, not far from taller plants that provide shade for it. It is important to choose a place so that maximum shading is provided in winter, when the sun is especially bright and dangerous for the health of the shrub.
What kind of soil does boxwood like
An evergreen shrub does not have very high requirements for soil nutrient saturation. But at the same time, a number of conditions are still recommended to be observed.
- Loamy or sandy loamy soils with moderate moisture levels are ideal for the plant. But the plant does not tolerate heavy soils with stagnant moisture.
- The acidity of the soil for boxwood should be neutral or slightly acidic; on too acidic soils, the plant does not develop well. It is useful to add slaked lime or mature compost to the soil at the shrub planting site, they will improve the composition of the soil and help create optimal conditions for the evergreen.
- The shrub does not like waterlogging. It must be planted in an area near which surface groundwater does not pass.
- The soil at the shrub planting site should be well-drained and aerated. If the soil does not meet these requirements, it can be improved, artificial drainage can be organized using perlite, broken brick or stone. It is also helpful to loosen the soil under the trunk of the bush more often.
The shrub belongs to the category of long-livers and can grow in one place for tens and hundreds of years. Therefore, the choice of a site and soil for boxwood must be taken very carefully so that subsequently the grown shrub does not have to be transferred to another place.
At what distance to plant boxwood
Usually, evergreen shrubs are planted not alone, but in groups - in the form of a hedge, low curb or carpet composition. In order for individual plants to develop freely and not interfere with each other, it is necessary to observe the distance between the bushes, it should be at least 30 cm.
How to plant boxwood correctly
The shrub planting algorithm is quite simple, but in preparation you need to adhere to certain rules.
- A planting hole for a shrub is prepared in advance. If the soil on the site is not well suited for growing boxwood, it must first be improved, dug up and mixed with perlite in an equal ratio.
- The depth and width of the planting hole should be approximately three times the size of the roots of the seedling together with the earthy clod.
- A small layer of perlite is poured onto the bottom of the dug hole - about 2-3 cm. The earth, mixed with perlite, is poured into the hole up to half.
- A day before planting in the ground, the shrub sapling must be moistened. To do this, it can be removed from the container, cleaned of the soil and placed in water, or it can be watered directly in the container so that the soil around the root system is saturated with moisture.
Directly planting an evergreen shrub looks like this:
- a boxwood seedling is lowered into a hole, half covered with earth, with or without an earthen clod, carefully spreading the roots of the plant;
- holding the boxwood, the planting pit is covered to the top with earth mixed with perlite, the soil must be poured gradually, making sure that there are no voids left in the hole;
- after the hole is filled to the top, the soil at the boxwood trunk is lightly tamped and watered properly, it is necessary to add at least 3 liters of water.
After watering, the soil near the trunk of the shrub will settle down a little, and then you will need to add some more substrate into the formed hole. There is no need to tamp the soil this time.Damp earth can be sprinkled with a small layer of perlite, it will improve water absorption and prevent its premature evaporation.
What to plant next to boxwood
The shrub looks especially impressive in group plantings, so it is often used to create artistic compositions. Flowering shrubs are good neighbors for boxwood, namely:
- lilac and jasmine;
- cistus and bush roses;
- geychera and barberry;
- other crops with similar requirements for growing conditions.
The deep shade of the shrub works best with the red, white, yellow and pink flowers of the plants, and the evergreen boxwood creates a pleasing contrast.
If a shrub is planted near an artificial or natural reservoir, then it can be combined with marigold, calamus, lily plants. The shrub will also successfully set off their flowering, and after leaf fall, it will preserve the decorative and attractiveness of the coastal zone.
How to care for boxwood
After planting, the shrub must be provided with quality care. In general, caring for boxwood in the garden does not cause special problems for gardeners; increased attention to the plant is required only with the onset of autumn, in preparation for the winter cold.
Watering boxwood
An ornamental shrub needs additional watering, but remains very sensitive to waterlogging. It is important to prevent moisture stagnation - in damp weather with heavy rains, you do not need to water the shrub, it will have enough natural precipitation.
For the first time, boxwood is watered immediately after planting. If a week after that it does not rain, watering must be done again - for a meter-long seedling, it is necessary to add about 10 liters of water. It is necessary to water the bush carefully, making sure that the water does not spread too widely over the ground, it should fall under the trunk of the bush and soak deeply, going to its roots.
In the future, the shrub is watered as the soil dries up, you need to carefully monitor the soil at the roots of the boxwood in dry weather. In the hottest months, it is recommended to water the plant once a week. If the soil dries quickly, you can increase the amount of water when watering, but you should not increase the frequency. Since the roots of the boxwood are quite long, it can take moisture from the deep layers of the soil for a long time, while excessively frequent watering leads to waterlogging of the soil.
You need to water the shrub in the morning, before the bright sun comes to the site, or after sunset. From time to time, it is recommended to carefully spray the shrub with water from above to wash away dust and dirt from the leaves of the plant.
Top dressing
Planting and caring for buxus arborescens, or boxwood, includes feeding, it ensures the rapid and healthy growth of an evergreen shrub. As a rule, for the first time, fertilizers are applied to the soil only a month after planting the plant, after the seedling is properly rooted. If wood ash or compost was added to the planting hole during autumn planting, top dressing can be postponed until spring - before the boxwood will not need additional nutrients.
In the future, you need to feed the shrub several times per season. In the spring, it is useful to add nitrogenous fertilizers to the soil, which will contribute to the growth of the green mass of the plant. In the fall, during the last loosening of the soil, the shrubs are fed with potassium and phosphorus, but nitrogen is not required to be introduced, it can provoke untimely vegetative processes.
Mulching and loosening
Stagnant moisture is detrimental to evergreen boxwood, therefore, loosening and mulching of the soil for it must be carried out without fail. It is customary to loosen the soil immediately after watering - this will allow the water to be better absorbed and at the same time saturate the soil with oxygen.
Boxwood mulching is carried out in the spring at the beginning of May. After the soil warms up qualitatively under the sun, it is sprinkled with a layer of peat 5-8 cm.To mulching does not damage the boxwood, you need to make sure that the peat does not come into contact with its young shoots or directly with the trunk.
Pruning
Planting and caring for a boxwood shrub involves pruning it regularly. A haircut for an evergreen boxwood can fall into two categories:
- sanitary;
- decorative.
The first is held without fail every spring - in April or early May. During it, all dried, broken and diseased branches are removed from the plant - this avoids the appearance of fungi and pests.
Decorative haircut of the plant is carried out as needed. The shrub tolerates pruning well, so you can trim it often, but usually it is done every few months. Decorative pruning is most often aimed at maintaining the curly shape of the roots, so that the shrub retains its shape, it is necessary to prune young shoots.
With the help of pruning, you can give the boxwood a standard shape. To do this, all the lower shoots of the plant are radically cut off, leaving only the central trunk, and the upper branches are trimmed so that the crown takes on the shape of a ball.
Protection against diseases and pests
Like any plant, boxwood remains vulnerable to several diseases and pests. Of the fungal diseases, the most dangerous for the shrub are:
- shoot necrosis - the tips of the plant's branches die off, and the leaves become covered with ugly dark spots;
- cancer - the disease is expressed in a change in the color of the foliage and its drying out;
- rust - in this disease, boxwood leaves become covered with bright orange spots, and then die off.
In all cases, boxwood treatment should be carried out using fungicidal solutions, for example, Fundazole. In order for the treatment to be effective, all the affected parts of the shrub must be removed and burned, while the cut sites are treated with copper sulfate in order to avoid rotting. The best prevention of fungal ailments is high-quality sanitary care of the shrub - the plant must be trimmed annually, removing all broken and dry twigs, and monitor the cleanliness of the soil near the roots.
Among the pests, the most dangerous for boxwood are the boxwood moth, spider mite, boxwood flea and felt. To prevent the appearance and reproduction of these insects, it is necessary to prophylactically treat the shrub with insecticides - Karbofos, Aktara, Tagore. Treatment should begin in early spring with the establishment of warm weather, you can repeat spraying in the middle of summer.
Preparing for winter
The winter period is the most difficult for the thermophilic boxwood, and with the onset of autumn, the gardener needs to pay special attention to the shrub.
Before the arrival of the first frost, it is necessary to water the plant abundantly for the last time before wintering. After that, the soil under the trunk is covered with a mulching layer in a circle.
With the onset of frosts below -10 ° C, the boxwood will need to be covered with high quality. The shrub is tightly wrapped with non-woven material or covered with spruce branches, the edges of the covering material are fixed with stakes. Before covering the branches of the plant, it is recommended to tie it so that heavy snow does not break the shoots.
It is also necessary to pay attention to caring for the boxwood in the spring - the shelter will need to be removed immediately after the onset of a constant thaw, since in the heat the boxwood can rebuke. To remove the covering material, choose a cloudy day.
Features of planting and caring for boxwood in different regions
Modern agrotechnical methods make it possible to grow southern shrubs in almost all regions of the country - from the Moscow region to Siberia and the Far East.But when breeding shrubs in the northern regions, it is necessary to take into account the peculiarities of the climate.
- Many gardeners mistakenly believe that the winters of central Russia do not pose a danger to boxwood. This is fundamentally wrong, since even in the Moscow region, the temperature in winter can drop significantly below - 20 ° C. Boxwood in the Moscow region definitely needs shelter for the winter.
- Planting and caring for boxwood in the Leningrad region requires special attention to the level of soil moisture. The humidity in the Leningrad region is high, therefore, watering of the bush should be carried out less often than in the dry and hot regions of the country.
- When planting boxwood in Siberia and the Urals, it is worth worrying first of all about the successful wintering of the plant, the shrub here needs careful covering. With the onset of spring, the shelter should not be removed immediately, but only after the final heat has been established.
How to grow boxwood at home
An interesting feature of boxwood is that the shrub is suitable for growing in tubs and containers at home. Boxwood grows very slowly, and it looks very attractive in the interior - it can be kept both indoors and on balconies, terraces and loggias.
In fact, caring for boxwood at home is not much different from growing a shrub outdoors.
- Boxwood still requires well-drained, slightly acidic or neutral soil, abundant irrigation without stagnant moisture, and periodic top dressing from spring to autumn.
- For the summer, indoor boxwood can be displayed on a balcony or on the street, the main thing is to remember that it needs to be shaded from direct sunlight.
- In winter, the shrub is best kept in a cool room with a temperature of about 16 ° C.
- The soil during the winter should be moistened from time to time, but the boxwood does not need abundant frequent watering during this period.
An evergreen plant is ideal for growing indoors, since in this case the owner no longer has to worry about the difficult wintering of the plant.
Reproduction of boxwood
To increase the population of boxwood on your site, it is not necessary to purchase expensive shrub seedlings. You can propagate the plant yourself, there are several simple ways to do this.
- Cuttings... Shoots for propagation are harvested from July to autumn, the cuttings are kept for a day in a solution that stimulates root growth, and then transferred to a container or pot with standard neutral or slightly acidic soil. Cuttings are grown at room temperature in a shaded place, on average, the rooting process takes 1-2 months.
- Seed reproduction... Fresh boxwood seeds, just out of the box, are soaked for a day in a growth stimulator, and then germinated for another month in wet gauze. After the emergence of seedlings, the seeds are sown in a container filled with a sand-peat mixture, covered with foil or glass and another 15-20 days are waiting for the appearance of green shoots. Strengthened seedlings are transferred to open ground not earlier than spring, after the final establishment of warm weather.
- Reproduction by layering... If the lower shoots of the boxwood are close to the ground, you can simply bend one of them, make a small incision on the surface of the stem and deepen it into the ground, securing the shoot so that it does not straighten. Care for the planted layer is carried out in the same way as for the main shrub; during the season, the layers should give strong roots. For the first winter, it is better to leave it next to the mother plant.
Of all the methods of reproduction of boxwood, the simplest and most effective is propagation by cuttings, even novice gardeners can cope with it without problems.
Conclusion
Planting and caring for boxwood can be carried out not only in the southern regions, but also in all other regions of the country, including those with a rather cold climate. Boxwood requires increased attention from the gardener in the autumn-winter period, but if you follow the basic rules of its cultivation, the shrub will safely endure the cold and retain maximum decorative effect.
For the first time I will plant boxwood. Thank you for the detailed information!
Can box trees be planted in an orchard?
Good day!
Boxwood grows well in the vicinity of deciduous trees and shrubs, so it can be grown without fear in the garden. There is no information that boxwood is poorly adjacent to any fruit and berry crops. The only thing to consider when choosing a suitable planting site is that he does not like waterlogged soil. Therefore, it is undesirable to plant boxwood where there is a high occurrence of groundwater or not far from moisture-loving trees and shrubs. Otherwise, there will be no special problems with growing.
We wish you high yields!